Essential Sealers Gold Satin – 1L Bottle
Suitable for all types of internal natural stone – the gold standard your stone deserves
Quick drying formula – forms a satin/gloss, durable stain-resistant coating!
Stonecare4u Essential Sealers Gold Satin Finish is a water-based gloss finish top coat protective multi-surface sealer that creates a durable, crystal clear gloss finish.
SC4U ESSENTIAL SEALERS GOLD SATIN FINISH is a highly effective multi-purpose indoor stone sealer. It has been developed to offer excellent sealing and oil & stain resistance to ALL types of indoor stone surfaces, including slate, limestone, granite, quartz, sandstone, travertine, marble and more. SEALERS GOLD saves you time and money, one sealer does it all!
Essential Sealer’s Gold Satin Finish is quick drying and easy to apply and will protect the applied surface against oil and water-based stains. It creates an attractive satin “wet look” sheen that becomes more pronounced the more you apply Not recommended for use on highly polished stone & ceramic glazed surfaces.
HOW TO APPLY:
- Before use, remove any loose debris from the work surface and ensure you have adequate personal protection, i.e gloves, suitable protective eye-wear, face mask & clothing.
- NOTE: Following the instructions below, perform a small test application on-site in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements DO NOT PROCEED; contact us to return the product.
- Apply the product thinly and evenly with a low pressure sprayer and micro-fibre mop, paint brush or soft cloth, taking care not to leave application marks or allowing the product to puddle on the surface.
- Allow 45-60 minutes drying time before applying the second coat, repeating the same process apply the product in the opposite direction to help to achieve an even consistent finish. If necessary more coats can be applied to achieve the desired finish.
Please Note: Surfaces which are not to be sealed must be protected with masking material. Always test product in an inconspicuous area to determine suitability for intended use.
Clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our indoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. NOT RECOMMENDED FOR USE ON NON-POROUS SURFACES.
Apply undiluted, up to 25M² per litre per coat.
Dependant on texture and porosity of surface.
KEEP OUT OF THE REACH OF CHILDREN
H302: Harmful if swallowed.
H319: Causes serious eye irritation.
P102: Keep out of reach of children.
P233: Keep container tightly closed.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+313: If skin irritation or rash occurs: Get medical advice.