Tile & Grout Sealer – 600ml Aerosol

Tile & Grout Sealer – 600ml Aerosol

£18.95 inc. VAT

EASY SPRAY ON APPLICATION

Works on both wall & floor grout & tiles and can be applied immediately after grouting. The fast drying formula offers instant protection against stains and does not change surface appearance.

NEW! Stonecare4u Tile & Grout Sealer Spray is a VOC compliant, solvent based formula designed for deep penetration into grout. It protects against oil and water based stains while still allowing the surface to breathe. Overspray that does not penetrate the ceramic tile, porcelain, glass, stone or grout will dissipate and not leave any hard to remove residue. It is non-yellowing, long lasting and will not change the appearance of the surface.

SKU: SC4U-TGS-600 Categories: , , ,

Description

Tile & Grout Sealer Spray – 600ml Aerosol

EASY SPRAY ON APPLICATION

Works on both wall & floor grout & tiles and can be applied immediately after grouting. The fast drying formula offers instant protection against stains and does not change surface appearance.

NEW! Stonecare4u Tile & Grout Sealer Spray is a VOC compliant, solvent based formula designed for deep penetration into grout. It protects against oil and water based stains while still allowing the surface to breathe. Overspray that does not penetrate the ceramic tile, porcelain, glass, stone or grout will dissipate and not leave any hard to remove residue. It is non-yellowing, long lasting and will not change the appearance of the surface.

HOW TO APPLY:

  1. Before application, make sure the area is well ventilated, ensure you are wearing personal protection equipment including gloves, eye protection and suitable vapour mask.
  2. Make sure that the surface is thoroughly clean and free from waxes, sealants, or coatings of any kind.
  3. Shake can well, spray 25-40cm from surface. Apply product evenly, wiping off any excess if spraying on to vertical areas.
  4. Allow to dry for 1-2 hours and test area after application using water droplets, if droplets are absorbed, a second or third coat may be necessary to attain the desired performance.

COVERAGE (per 600ml):

Linear feet: Up to 700
Square metres: Up to 15m2

IMPORTANT NOTE:

Surfaces which are not to be sealed must be protected with masking material. Do not apply sealer onto acrylic or stained surfaces, such as cabinets, as this may cause discolouration.

MAINTENANCE:

Clean treated areas with water and a pH neutral cleaner. Do not use harsh or abrasive cleaning agents on treated surfaces.

Expected wear up to 20 yrs
This will vary depending on the type of surface, wear and proper maintenance.

KEEP OUT OF THE REACH OF CHILDREN & PETSsafety symbols

SAFETY CAUTIONS:

Contains: Naptha Petroleum Hydrotreated Light and Butyl Acetate

Hazards:
Extremely flammable aerosol.
Pressurised container: may burst if heated. Causes skin irritation.
May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.


Precautions:
Keep out of reach of children.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Avoid breathing vapour/spray.
Use only outdoors or in a well-ventilated area.
Use personal protective equipment as required.
Get medical advice/attention if you feel unwell.
Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Dispose of contents/container in accordance with national regulations.

Additional information

Weight 0.6 kg
Dimensions 8 × 8 × 20 cm
Technical Datasheet

Download

To apply safely, we recommend: